Moxa Samples: What's in the Kit & How to Order
A sample is a decision tool, not a gift. Ours is cut from the production lot that would fill your order, packed with the batch record and test report you would receive on a shipment — so the thing you burn on your desk is the thing you would receive on a pallet.
Short answer: you choose a kit by product line, we build it from the current production lot, and it arrives with a spec sheet, a batch record and the test report for that lot. Kits are quoted with the courier cost shown separately — we do not run a free-sample pipeline, because free samples travel without a batch record.
1. Four kits, chosen by what you need to decide
| Kit | What is inside | The decision it answers |
|---|---|---|
| Ratio kit | Wool swatches at 5:1, 10:1, 15:1, 20:1 and 30:1, 100 g each, in labelled jars with the input-leaf note | Which ratio your channel should sell, and whether the fineness is visible at the price you intend |
| Stick & cone kit | Sticks in Ø15, 25, 30 and 40 mm; rolls in Ø25 and 40 mm; cones in small, medium and large | Diameter, density, ash behaviour and smoke level for a studio or retail line |
| Low-smoke kit | Charcoal-based low-smoke sticks and blocks, plus one standard stick for comparison | Whether smoke is the objection you need to solve, or the objection you can live with |
| Retail pack kit | One printed box in your artwork direction, one blank box, barrier film and desiccant sample, patch sachets if relevant | Whether the pack survives the shelf and the courier, and how much the artwork costs to plate |
Kits can be combined. Most first-time buyers take the ratio kit plus the stick kit, which covers the two questions that decide a first order: what quality band, and what physical format.
2. What arrives with the samples
- Spec sheet per SKU — dimensions, weight, ratio, moisture at packing, pack count
- Batch record — harvest year, processing route, sieving standard, lot number
- Test report for the lot — heavy metals and pesticide residue at minimum; microbiology where the format calls for it
- Burn and smoke notes for combustible formats — the observation sheet our QC fills in, not a marketing line
- Label mock-up if you sent artwork directions, so the pack question is answered before the plate is cut
If a test you need is not in the standard pack, say so at the enquiry stage. Adding an assay to a lot takes days; adding it after the sample arrives takes weeks.
3. Timeline from request to verdict
| Step | What happens | Working days |
|---|---|---|
| 1. Kit confirmed | You pick the kits, we confirm composition, fee and courier cost, and the destination address | 1–2 |
| 2. Kit built | Cut from the current production lot, labelled, packed with documents | 5–7 |
| 3. Courier | Express air with tracking; most destinations 3–6 days, remote postcodes longer | 3–6 |
| 4. Your test | Burn test, ash inspection, smoke observation, pack fit — we send an evaluation sheet with the kit | 2–5 |
| 5. Confirmation | Ratio and format locked, quote reissued against the confirmed lot, production slot booked | 2 |
Total: roughly two to three weeks, of which your own testing is the part that varies. Buyers who skip step 4 and go straight to a container order are the ones who discover a smoke problem on the second order.
4. How to read a moxa sample properly
- Burn one stick end to end. Watch whether the ash holds or falls, whether the burn is even, and how much smoke the room carries. A stick that smells right and burns badly is still a bad stick.
- Rub a pinch of wool. Fine wool should feel soft and slightly oily, not gritty. Grit means leaf dust; stalks mean coarse sieving.
- Weigh and measure. A 40 mm stick that is 40 mm but light will burn hot and fast. Density is the spec nobody prints.
- Check moisture at packing. Above roughly 10% and the format can mould in a container; our sheet states the measured value.
- Test the pack, not just the product. Drop the retail box from waist height, then open it. That is the courier's test, run early.
5. Fee, freight and what we do not promise
Sample kits are quoted per destination. The kit price reflects production material and the labour of building and documenting it; the courier cost is shown as its own line so you can see what express air adds. We do not advertise free samples, and we do not send material without a batch record. Credit or deduction against a later production order is a commercial term, not a standing policy — ask for it in writing with your first order and it can be discussed.
6. Common questions
How long does a sample take to arrive?
Is the sample the same as production?
Can I get a sample of a private-label SKU?
What if the ratio on the sample does not match the claim?
Order a kit against your real decision
Tell us the channel, the format you are considering and the ratio band. We will confirm the kit composition and the all-in cost to your address before anything is built.
Request a Sample Kit