OEM/ODM & Wholesale · Origin: Qichun, Hubei, China · Time zone UTC+8
Home / Products / Pricing
Trade terms · No published list price

Moxa Wholesale Pricing: What Sets the Price per Kg

Moxa is quoted per order, not per catalogue. Six variables decide the number — ratio, leaf grade, product form, packing, order size and Incoterm — and a quote that ignores any of them is a guess with a decimal point.

Last reviewed: 2026-11-18 Quote turnaround: 2 business days Indices here are planning aids, not offers

Short answer: our moxa is not sold at a fixed price per kilogram, because two orders that both read "10:1 moxa wool, 1,000 kg" can differ by 40% in cost before freight. We quote each order against the six variables below and send a costed sheet within two business days.

1. The six variables that move the number

VariableWhat it changesTypical swing
Ratio (5:1 → 30:1)Kilograms of dried leaf consumed per kilogram of finished wool. The single largest cost line.5:1 to 30:1 can roughly triple the wool cost
Leaf grade & harvest yearLeaf age, leaf-to-stem share, moisture, dust level. Old or stem-heavy leaf is cheaper and burns differently.10–20% either way
Product formLoose wool is nearly all material cost. Sticks, rolls and cones add paper, rolling labour and reject rate; boxes and patches add tooling, assembly and testing.Labour share rises from ~10% to ~45%
PackingBulk carton vs retail box, desiccant, barrier film, label count, inner code printing.Often larger than the ratio difference on low-MOQ runs
Order sizeSetup, tooling and freight are spread over the run. Halving the quantity rarely halves the invoice.Trial vs container: 15–30% per unit
Incoterm & laneFOB, CIF or DDP; port pair; whether we consolidate with other SKUs.Freight is 5–25% of landed cost depending on form

Swing figures are our own planning estimates from past quotations, not market index values. They are here so you can tell which lever to pull before asking for a price.

2. Ratio is the biggest lever, and the least linear

Ratio is an input-to-output measure: 10 kg of dried leaf to 1 kg of finished wool. Because leaf is the dominant cost, the ratio behaves almost like a multiplier — but not quite, since labour and loss per kilogram stay roughly flat. The index below is for planning comparisons only; every quote is rebuilt from the actual leaf lot.

RatioLeaf input per kg woolRelative wool cost (10:1 = 1.00)Where it is normally used
5:1~5 kg0.62Studio sticks where visible heat output matters more than fineness
10:1~10 kg1.00General wholesale sticks and rolls
15:1~15 kg1.35Retail sticks, mid-tier private label
20:1~20 kg1.65Premium retail, softer ash, less stalk
30:1~30 kg2.30Gold-grade fine work, direct moxa, small cones

Two practical notes. First, a higher ratio does not automatically mean a better product for your channel: retail buyers judge smoke, ash and burn time as much as fineness. Second, "30:1" from two different factories is not the same product unless the input leaf and the sieving standard match — which is why our quotes carry a batch record and a retention sample rather than a ratio claim alone.

3. Order size and MOQ tiers

We publish MOQ per format instead of hiding it behind a form, because a buyer who cannot meet the MOQ should learn that in ten seconds, not after a week of email. Trial tiers exist so a first order can be small without being free.

FormatMOQTrial tierWhat the trial tier is for
Moxa wool50 kg10 kgRatio and sieve comparison before committing to a blend
Moxa sticks2,000 pcs500 pcsBurn test, smoke level, label mock-up on your artwork
Moxa rolls5,000 pcs1,000 pcsRetail pack trial for one SKU
Moxa cones5,000 pcs1,000 pcsSize and density trial across three sizes
Low-smoke sticks & blocks2,000 pcs500 pcsIndoor-venue test in a real treatment room
Moxibustion box500 pcs100 pcsChamber count and mesh fit check
Mugwort oil3,000 units—Fill, dropper and label trial
Heat patches10,000 pcs—Lowest-barrier SKU for a private-label test

4. What is inside the quote we send

  • Unit price by SKU at your stated quantity, with the ratio and leaf lot written next to it
  • Setup and tooling as separate lines where they apply — printing plates, dies, box tooling. One-time, not per unit.
  • Packing cost for the exact pack you asked for, including desiccant and barrier film if the format needs it
  • Freight option in at least two forms: FOB port and CIF or DDP to your address, so you can see what the lane adds
  • Testing you requested — heavy metals, pesticide residue, microbiology, burn and smoke notes
  • Lead time counted from artwork approval, not from the enquiry
  • Validity window, because leaf lots and freight rates both move

What is not in the quote: duty, your broker's fees, and the cost of changing artwork after plates are made. Those belong to the importer and are worth pricing before you compare suppliers.

5. Four ways to lower landed cost without cutting the ratio

  • Consolidate SKUs into one shipment — one container with three formats usually beats three LCL bookings on freight per kilogram.
  • Move up one pack size — a 40-stick box instead of a 10-stick box removes a real share of the packing cost, and retail rarely notices.
  • Quote FOB and arrange your own freight if you already have a forwarder with a China lane; the difference is visible in the line items.
  • Book the run in the quieter season — labour and container space both cost less outside the pre-holiday rush, and the leaf is the same.

The lever we do not recommend is shaving the ratio to hit a target price. It is the one change your customer can feel, and it is the one change you cannot explain later.

6. Common questions

What is the price of moxa per kg?
There is no single figure. Loose wool at 10:1 sits in one band, 30:1 wool in a higher one, and sticks or cones add paper, labour and reject rate on top. Send the format, ratio, quantity, packing and destination port and we return a costed sheet within two business days. We do not publish a list price because a number without those five inputs would mislead both of us.
Is 30:1 twice the price of 15:1?
No. Leaf input doubles, but labour, paper, packing and freight per kilogram barely move, so the finished price typically rises by far less than double. On loose wool the ratio dominates; on a retail box of sticks the ratio can be a third of the cost.
Can I get a price without ordering a sample?
Yes, a budgetary quote is available from specifications alone. It will carry an assumption line — usually "leaf lot to be confirmed" — and we will not treat it as fixed until a sample is approved. Most first orders go quote, sample, then confirm.
Do you charge for samples?
Sample kits are quoted per destination, with the courier cost shown separately. The kit itself is built from production material, so what you test is what you would receive. See the sample page for what each kit contains.
Why we do not publish prices.
A list price invites comparison between numbers that were built on different ratios, different leaf lots and different packing. We would rather send one sheet you can audit line by line. Ratios and indices on this page are planning aids; only the signed quotation is an offer.

Get a costed sheet, not a range

Send the format, ratio, quantity, packing and destination port. You get unit price, setup, packing, two freight options and a lead time counted from artwork approval.

Request a Quote