OEM/ODM & Wholesale · Origin: Qichun, Hubei, China · Time zone UTC+8
Home / Compliance / United States
Country Guide · North America

Importing Moxa into the United States: FDA Paths, HTS Codes & Claims

The US is the market where the category decision is worth more than the price negotiation. The same moxa stick can enter as a Class I medical device or as a general consumer product — and the difference decides your registration, your label and the claims you may print.

Last reviewed: 2026-11-17 Next review: 2027-02 General information — not legal advice

There is no "moxa" category in US law. A burning moxa roll, an adhesive moxa cone, an infrared moxibustion device, a bag of moxa wool and a mugwort warming balm are regulated as five different things by three different parts of the FDA — and one of them needs a 510(k) before it can be sold at all.

1. Which door your product walks through

The table is our working map, built from how products in this category are actually listed in FDA's databases. It is a direction indicator, not a ruling: final classification depends on your intended use statement and labelling, and is confirmed by FDA or your US regulatory consultant.

Product formMost common US pathWhat decides it
Moxa sticks, rolls, cones
(combustible, for heat treatment)
Class I medical device. The majority of moxa records in FDA's UDI database carry product code IMA (Pack, Heat, Moist), regulated under 21 CFR 890.5730 and exempt from premarket notification. Whether the product is presented for heat treatment of the body. That presentation pulls it into the device framework even though no 510(k) is required.
Adhesive moxa, press-tack cones Class I device under product code KNM (Device, Pressure Applying), 21 CFR 890.5765 — also premarket exempt. The adhesive or pressure-applying function. Several dozen Chinese manufacturers are registered under this code, so it is a well-trodden path.
Electric / infrared moxibustion devices Class II device under product code ILY (Lamp, Infrared, Therapeutic Heating), 21 CFR 890.5500 — 510(k) required before marketing. Whether the device emits therapeutic heat. A predicate exists: the Sedatelec Premio 10 Moxa was cleared under K101267 in 2010.
Moxa wool, dried leaf, loose fibre Not a device in raw-material form. Enters as a plant product under HTS 1211.90 (free or 4.8%, see §4). Processing depth and end use. Sell it as an ingredient to a manufacturer and it stays a raw material; pack it as a consumer heat product and the device logic can follow it.
Patches, balms, massage oils Cosmetic under MoCRA — facility registration and product listing. Air-activated heat patches are usually treated as devices or general consumer products instead. Ingredients, mechanism and claims. Any statement that the product treats a condition turns a cosmetic into a drug.

Sources checked 2026-11-17: FDA Product Classification database (codes IMA, KNM, ILY), 21 CFR Part 890, FDA UDI/GUDID records, USITC Harmonized Tariff Schedule 2026. Links to the official databases are in the document pack we send with quotations.

2. The device route in practice

"Premarket exempt" is the phrase that causes the most expensive misunderstandings. It means you do not file a 510(k). It does not mean the product is unregulated. Under 21 CFR Part 807, a device offered for commercial distribution in the US generally requires:

  • Establishment registration — for the facility that manufactures, repackages or relabels the device. Foreign establishments register with FDA and must name a US agent resident in the United States.
  • Device listing — the specific product, linked to the establishment registration, with the product code (for moxa, usually IMA or KNM).
  • Annual renewal — registration runs on a calendar cycle renewed between 1 October and 31 December each year. Miss it and listings go inactive.
  • Labeling under 21 CFR 801 — statement of identity, net quantity, name and place of business of the manufacturer, packer or distributor, adequate directions for use, and warnings.
  • UDI — device identification labelling and GUDID submission apply unless a specific exemption covers the product. Moxa records do appear in GUDID, so assume it applies until told otherwise.
  • Complaint and recall records — even exempt Class I devices sit inside FDA's reporting and recall framework.
The practical order of operations is: fix the intended-use sentence, then register and list, then print the label. Almost every failed US launch we have seen started with artwork that described a therapy the registration did not cover.

As a manufacturer, we supply the facility details, product specifications and labels your registration needs. We cannot register on your behalf, and we cannot be your US agent — those are your legal responsibilities as the importer of record.

3. Topicals: MoCRA changed the paperwork

If your product is a cosmetic — a warming balm, a massage oil, a skin-care patch — the Modernization of Cosmetics Regulation Act of 2022 (MoCRA) added two obligations that did not exist before:

  • Facility registration — manufacturing and processing facilities must register with FDA, update within 60 days of changes, and renew every two years.
  • Product listing — the "responsible person" (the name on the label) must list each marketed product with its ingredients, and update annually.

The statutory deadline was 29 December 2023; FDA stated it would not enforce before 1 July 2024, and enforcement is now live. MoCRA also brought in safety substantiation records, serious adverse-event reporting within 15 business days, and a requirement to show contact details for adverse-event reports on the label. Small-business exemptions exist but do not cover products for internal use or products intended to alter appearance for more than 24 hours — check your own position rather than assuming the exemption.

4. HTS, duty and origin marking

ProductLikely HTS lineDuty position
Dried mugwort leaf, crude or not manufactured1211.90.20.00Free (MFN)
Moxa wool, cut, crushed or further processed leaf1211.90.40.404.8% (MFN); free under several trade programmes
Prepared moxa sticks, rolls, conesDetermined by composition and presentation — often still Chapter 12 material, but a mounted or device-presented product can moveConfirm with your broker before the first shipment
Patches and balmsChapter 33 or 38 depending on formulationVaries by line

Three things to check that are not on the tariff page:

  • Additional duties. China-origin goods can attract Section 301 duties that change at short notice. Ask your broker for the landed cost, not the MFN rate, and re-check before every PO.
  • Origin marking. Under 19 CFR Part 134, the country of origin must be marked legibly and permanently on the article or its container — "Made in China" on the retail pack, not only on the carton.
  • Entry mechanics. Ocean freight needs an Importer Security Filing before loading; low-value consignments are no longer reliably duty-free. A licensed customs broker is cheaper than a detention.

5. Claims: where the FDA and FTC lines sit

Two agencies police the words on your pack and your product page. FDA decides whether a claim turns your product into a drug or a device; the FTC decides whether the claim is substantiated. The FTC's Health Products Compliance Guidance (issued December 2022) requires "competent and reliable scientific evidence" — which for a moxa product usually means you do not have it, so the claim should not be made.

Defensible wording

  • "Traditional moxibustion practice"
  • "Warming heat therapy accessory" (device framing)
  • "Daily herbal care" / "self-care ritual"
  • "Aromatherapy" for the oil, with no body-system claim
  • Directions, warnings and burn-safety language

Wording that changes your category

  • "Relieves arthritis / back pain / cramps"
  • "Improves circulation", "boosts immunity", "detoxifies"
  • Any named condition, symptom or diagnosis
  • Before/after medical imagery or testimonial cures
  • Comparisons to drugs or clinical treatment protocols

There is a legitimate middle ground: describing what the product is and how it is used is not a disease claim. "A traditional practice in which dried mugwort is burned near the body to provide warming heat" describes the product. "Burns away your knee pain" describes an outcome you cannot substantiate.

6. Documents we prepare for a US shipment

  • Commercial invoice and packing list with HTS code per line item
  • Manufacturer's declaration and specification sheet per SKU
  • Batch record: batch number, harvest year, processing route, ratio verification
  • Third-party test report — heavy metals, pesticide residue, microbiology, plus burn/smoke notes for combustible formats
  • Label artwork with the intended-use sentence, warnings and "Made in China" marking
  • Non-wood packing declaration where relevant
  • Facility information your establishment registration will ask for

We send artwork and the test pack for review before mass production. Corrections at pre-press are free; corrections after the container lands are not.

7. What we need from you

  • Target channel — practitioner supply, spa retail, e-commerce, or mass retail
  • The intended-use sentence exactly as it will appear on pack and listing
  • Whether you will register as the importer of record and who your US agent is
  • Which SKUs are in the first order — device forms and cosmetic forms should not share one launch date

8. Common questions

Do moxa sticks need FDA clearance?
Not clearance, but usually registration. Most combustible moxa is treated as a Class I device under product code IMA, which is exempt from premarket notification — no 510(k). Establishment registration and device listing generally still apply, and a foreign manufacturer needs a US agent. Confirm the intended use with your consultant before printing artwork.
Can a moxa product avoid the device framework entirely?
Sometimes, by being sold purely as a traditional or cultural product with no device-like presentation, accessories or therapeutic intent. That is a commercial and regulatory decision, not a labelling trick — and it usually narrows the channels you can sell into. Practitioners expect a device listing; mass retail may prefer a consumer product.
What does the 510(k) requirement mean for an electric moxa device?
It means you cannot legally market the device in the US until FDA clears a premarket notification showing substantial equivalence to a predicate. An infrared moxibustion unit falls under product code ILY, Class II, 21 CFR 890.5500. Budget months, not weeks, and expect electrical safety and EMC testing as part of the file.
Is moxa wool treated as a food or a device at the border?
As a raw plant material it is neither: it enters under Chapter 12 of the HTS. The question is what happens downstream. Sold to a manufacturer as an ingredient, it stays a raw material; sold to a consumer as a heat-treatment product, the device logic can apply; sold for ingestion, the food and supplement framework applies, including facility registration and prior notice.
This page is a working note, not a legal opinion.
US classification is decided case by case on intended use and labelling, and the rules in this area change — MoCRA itself is still being implemented through guidance and rulemaking. Everything here is for orientation and planning. Confirm your specific product, formula and claims with FDA guidance or a qualified US regulatory advisor before you register, print packaging or place an order. See also the general compliance guide and the claim-language checklist.

Planning a US launch?

Send the product form, the intended-use sentence and your channel. We'll come back with the likely device code, the label fields your registration will ask for, and a first-order plan that separates device SKUs from cosmetic ones.

Ask About the US